Super DOT 4 (Low Viscosity)
AGREX Super DOT 4 (Low Viscosity) — Low-viscosity, high-boiling brake fluid engineered for electronically controlled braking systems. The reduced cold viscosity allows rapid hydraulic response from ABS, ESP and traction-control pump units, while the elevated boiling point supports sustained high-temperature braking.
AGREX Super DOT 4 (Low Viscosity) — Low-viscosity, high-boiling brake fluid engineered for electronically controlled braking systems. The reduced cold viscosity allows rapid hydraulic response from ABS, ESP and traction-control pump units, while the elevated boiling point supports sustained high-temperature braking.
- Vehicles with ABS, ESP, EBD and traction control
- ADAS-equipped vehicles with autonomous emergency braking
- Performance and premium passenger cars
- Cold-climate operation
| Standard | FMVSS No. 116 DOT 4 · ISO 4925 Class 6 (low viscosity) |
|---|---|
| Boiling Point | Dry ERBP 250°C min · Wet ERBP 165°C min |
| Low-Temp Viscosity | Max 750 mm²/s at −40°C |
| Packaging | 250 ml, 500 ml, 1 L, 5 L, 20 L, 210 L |
| Appearance / Physical Form | Clear, colourless to pale yellow, slightly viscous liquid; hygroscopic (absorbs moisture from air) |
|---|---|
| Flash Point | Typically 110–140°C depending on glycol ether/borate ester composition — confirm exact value on batch COA |
| Flammability | Combustible liquid; keep away from ignition sources, especially during bulk handling or spillage on hot exhaust/brake components. |
| Key Hazards | Harmful if swallowed — polyglycol ether and borate ester based brake fluids are toxic on ingestion. Irritating to eyes and skin on direct or prolonged contact. Severely damages painted surfaces and many plastics on contact — treat spills on vehicle bodywork immediately. Do not mix DOT 5 (silicone) fluid with this glycol-based product. |
| Skin / Eye Contact | Wash skin immediately with soap and water. Flush eyes thoroughly with water for several minutes and seek medical attention if irritation persists. |
| Inhalation | Low volatility hazard under normal handling; ensure ventilation when handling in bulk or during system bleeding in enclosed workshop bays. |
| Storage | Store in tightly sealed original containers — brake fluid absorbs atmospheric moisture, which lowers its boiling point once opened. Keep away from children, food, and painted surfaces. |
| Spill & Disposal | Contain spill and prevent contact with vehicle paintwork and plastics. Absorb with inert material and dispose of via a licensed hazardous-waste handler; do not discharge to drains. |
What standard does AGREX Super DOT 4 (Low Viscosity) meet?
AGREX Super DOT 4 (Low Viscosity) is manufactured to FMVSS No. 116 DOT 4 · ISO 4925 Class 6 (low viscosity). Always confirm the current specification against the latest Technical Data Sheet before selection.
What pack sizes are available for AGREX Super DOT 4 (Low Viscosity)?
AGREX Super DOT 4 (Low Viscosity) is available in 250 ml, 500 ml, 1 L, 5 L, 20 L, 210 L. Custom pack sizes and bulk/tanker supply can be arranged for OEM, private-label and distributor orders.
Who manufactures AGREX Super DOT 4 (Low Viscosity)?
AGREX Super DOT 4 (Low Viscosity) is manufactured by MniGlobal Core Products Pvt. Ltd. at its ISO 9001:2015 and ISO 14001:2015 certified facility in GIDC Matar, Kheda, Gujarat, India. ---
