Brake Fluid DOT 5.1
AGREX Brake Fluid DOT 5.1 — Top-tier polyglycol brake fluid offering the highest dry and wet boiling points in the range for severe-duty and high-thermal-load braking. Being polyglycol based, it is miscible with DOT 3 and DOT 4 fluids and suitable for the same seal materials — unlike silicone-based DOT 5, which must never be mixed with glycol fluids.
AGREX Brake Fluid DOT 5.1 — Top-tier polyglycol brake fluid offering the highest dry and wet boiling points in the range for severe-duty and high-thermal-load braking. Being polyglycol based, it is miscible with DOT 3 and DOT 4 fluids and suitable for the same seal materials — unlike silicone-based DOT 5, which must never be mixed with glycol fluids.
- High-performance and sports vehicles
- Heavy commercial vehicles and buses
- Motorsport and track use
- Long-descent and mountain operation
- Severe-duty fleet service
| Standard | IS 8654 Type III · FMVSS No. 116 DOT 5.1 · ISO 4925 Class 5.1 |
|---|---|
| Boiling Point | Dry ERBP 260°C min · Wet ERBP 180°C min |
| Base | Polyglycol ether — not silicone based |
| Packaging | 250 ml, 500 ml, 1 L, 5 L, 20 L, 210 L |
| Appearance / Physical Form | Clear, colourless to pale yellow, slightly viscous liquid; hygroscopic (absorbs moisture from air) |
|---|---|
| Flash Point | Typically 110–140°C depending on glycol ether/borate ester composition — confirm exact value on batch COA |
| Flammability | Combustible liquid; keep away from ignition sources, especially during bulk handling or spillage on hot exhaust/brake components. |
| Key Hazards | Harmful if swallowed — polyglycol ether and borate ester based brake fluids are toxic on ingestion. Irritating to eyes and skin on direct or prolonged contact. Severely damages painted surfaces and many plastics on contact — treat spills on vehicle bodywork immediately. Do not mix DOT 5 (silicone) fluid with this glycol-based product. |
| Skin / Eye Contact | Wash skin immediately with soap and water. Flush eyes thoroughly with water for several minutes and seek medical attention if irritation persists. |
| Inhalation | Low volatility hazard under normal handling; ensure ventilation when handling in bulk or during system bleeding in enclosed workshop bays. |
| Storage | Store in tightly sealed original containers — brake fluid absorbs atmospheric moisture, which lowers its boiling point once opened. Keep away from children, food, and painted surfaces. |
| Spill & Disposal | Contain spill and prevent contact with vehicle paintwork and plastics. Absorb with inert material and dispose of via a licensed hazardous-waste handler; do not discharge to drains. |
What standard does AGREX Brake Fluid DOT 5.1 meet?
AGREX Brake Fluid DOT 5.1 is manufactured to IS 8654 Type III · FMVSS No. 116 DOT 5.1 · ISO 4925 Class 5.1. Always confirm the current specification against the latest Technical Data Sheet before selection.
What pack sizes are available for AGREX Brake Fluid DOT 5.1?
AGREX Brake Fluid DOT 5.1 is available in 250 ml, 500 ml, 1 L, 5 L, 20 L, 210 L. Custom pack sizes and bulk/tanker supply can be arranged for OEM, private-label and distributor orders.
Who manufactures AGREX Brake Fluid DOT 5.1?
AGREX Brake Fluid DOT 5.1 is manufactured by MniGlobal Core Products Pvt. Ltd. at its ISO 9001:2015 and ISO 14001:2015 certified facility in GIDC Matar, Kheda, Gujarat, India. ---
