Oil Based Heat Transfer Coolant
AGREX Oil Based Heat Transfer Coolant — Non-aqueous closed-loop cooling and temperature-control fluid for systems where water cannot be used — because of freezing, electrical conductivity, scale or corrosion risk. Offers wide operating range, excellent oxidation stability and low vapour pressure.
AGREX Oil Based Heat Transfer Coolant — Non-aqueous closed-loop cooling and temperature-control fluid for systems where water cannot be used — because of freezing, electrical conductivity, scale or corrosion risk. Offers wide operating range, excellent oxidation stability and low vapour pressure.
- Mould temperature controllers
- Closed-loop process cooling
- Quench tank and heat-treatment circuits
- Dielectric and electrical cooling
- Low-temperature brine replacement circuits
| Standard | ISO 6743-12 (Family Q) · DIN 51522 |
|---|---|
| Viscosity Range | ISO VG 32 / 46 / 68 for cooling duty; VG 500 / 600 available as Thermic Oil |
| Packaging | 20 L, 50 L, 210 L |
| Appearance / Physical Form | Clear to amber liquid, mild mineral-oil odour |
|---|---|
| Flash Point | Typically >170°C (Cleveland Open Cup) — grade and viscosity dependent; confirm on batch COA |
| Flammability | Combustible liquid; not classified as flammable under normal handling |
| Key Hazards | Not classified as acutely toxic. Repeated or prolonged skin contact may cause irritation, defatting or dermatitis. Mist formation should be minimised in high-pressure or high-speed applications. |
| Skin / Eye Contact | Wash exposed skin thoroughly with soap and water. Flush eyes with clean water for several minutes if contact occurs and seek medical advice if irritation persists. |
| Inhalation | Avoid prolonged exposure to oil mist or vapour; ensure adequate ventilation, especially near hot machine surfaces. |
| Storage | Store in sealed containers in a cool, dry, well-ventilated area away from oxidisers and open flame. |
| Spill & Disposal | Contain spill, absorb with inert material, and dispose of via a licensed waste-oil handler. Do not allow entry into drains, soil or water bodies. |
What standard does AGREX Oil Based Heat Transfer Coolant meet?
AGREX Oil Based Heat Transfer Coolant is manufactured to ISO 6743-12 (Family Q) · DIN 51522. Always confirm the current specification against the latest Technical Data Sheet before selection.
What pack sizes are available for AGREX Oil Based Heat Transfer Coolant?
AGREX Oil Based Heat Transfer Coolant is available in 20 L, 50 L, 210 L. Custom pack sizes and bulk/tanker supply can be arranged for OEM, private-label and distributor orders.
Who manufactures AGREX Oil Based Heat Transfer Coolant?
AGREX Oil Based Heat Transfer Coolant is manufactured by MniGlobal Core Products Pvt. Ltd. at its ISO 9001:2015 and ISO 14001:2015 certified facility in GIDC Matar, Kheda, Gujarat, India. ---
